Disassembly (Field Stripping)
Please click pictures to see larger image.
Cock the hammer
and push the slide rearward
until the semi-circular tab on the back of the slide stop is aligned with the semicircular disassembly notch on the bottom of the slide.
The semi-circular notch is the one pictured on the RIGHT hand side in the image below
Always run a dry patch through the bore, prior to shooting to remove excess oil or grease.
Lead warning
Discharging firearms in poorly ventilated areas, cleaning firearms, or handling ammunition may result in exposure to lead and other chemical known to cause birth defects, reproductive harm, cancer, and other serious physical injury. Ensure adequate ventilation at all times. Wash hands thoroughly after exposure.
Spare Parts
Use only genuine Valtro spare parts. Use of inferior after market parts can create unsafe conditions. Use of other after market parts voids all guaranties and warranties. Modifications and alterations of the pistol or its parts voids all guarantees and warranties.
© Copyright
2001, 2002, Valtro USA and MemorablePlaces.com
This page was last updated by Memorable
Places Consulting on: July 20, 2002
All Rights Reserved
[About Valtro]
[Handguns]
[Shotguns]
[Parts]
[Links] [Sitemap] [Manuals] [Contact Us]